These equipment recommendations are tailored for fencers in the United States and are geared toward newcomers. They are based on the following factors: affordability, accessibility, effectiveness, and quality.

I would recommend every piece of equipment in this article to members of my club. You can choose which one best fits your needs and budget. This list is intended as a helpful starting point and is not exhaustive. The community is consistently working to improve the accessibility and affordability of gear; new options are always being developed as manufacturers take advantage of technological improvements to increase practitioner safety.

Kit

Head

Fencing Mask

For an introduction to the differences between newton ratings for fencing masks, see this article by Keith Farrell about the difference between a “350N” fencing mask and a “1600N” fencing mask. Note that the minimum recommended newton rating for HEMA is 350.

  • AF Mask:

    • This mask offers great protection at an affordable cost and is the one of the best starting masks for beginners.

  • SPES Back of Head Protector:

    • Back of the head protection is required for steel fighting to protect the back of the head, neck, and upper spine from accidental blows. Overlays like the Unity and Trinity provide increased protection at increased cost, but they also tend to trap more heat inside the mask.

  • AF Deluxe HEMA Fencing Mask:

    • This version of the AF Fencing Mask has integrated back of head protection and padding on the sides and top of the mask. This makes it an excellent option for beginners who want extra protection. The main disadvantages are that the extra padding causes the mask to trap more heat and can impact mobility of the head. It also makes the mask more challenging to clean.

Gorget

  • Destroyer Modz (top recommendation):

    • This is the unofficial default for the VCU HEMA club because it is small and tucks under the jacket nicely. It is affordable, accessible, low tech, and low hassle. This review written by Keith Farrell provides a more detailed critique.

  • PBT:

    • This has extra padding that can fit under the jacket for the collarbone, which is a nice feature, but depending on the jacket might not be necessary. This review by Keith Farrell offers a more detailed critique.

  • Red Dragon:

    • Easily accessible on Amazon, this is a simple and cheap option that does the job. The bib can also tuck under the lip of a chest protector when used without a jacket and can help prevent thrusts from deflecting off of the protector and sliding up under the mask.

  • Articulated Leon Paul Gorget:

    • This gorget is articulated and fully encloses the neck. It is arguably the most complete (and expensive) neck protection on the market.

Torso

Jacket

  • SPES AP Light (top recommendation):

    • This jacket is slightly more expensive than the base jacket. What makes it special is the extra integrated padding on the ribs, sternum, and shoulders, as well as its lighter weight and wicking lining. These features make it a worthwhile investment for those who desire greater protection and comfort than is offered by the base jacket. The women’s version is specifically cut to accommodate breasts. This jacket is multipurpose and can be used when training with most weapons.

      • There is a pro version that incorporates integrated rigid protection and is an excellent value.

  • SPES Officer Jacket:

    • This is the lightest and arguably nicest looking jacket offered by SPES. It is optimized for use with one-handed weapons such as saber and for use in light sparring. Because of that, it does not have the padding needed to take blows from steel swords without the addition of rigid forearm and chest protection.

    • Jason Barrons gives his thoughts in this Measure and Weigh: SPES Officer's Jacket written review.

  • Gajardoni Jacket:

    • This spectacular-looking jacket is made in Italy; it pioneered the internal foam plate concept that SPES has since integrated into their jackets. It includes hard shoulder and elbow plates and moves very well when properly fitted.

    • Jason Barrons gives his review in this Measure and Weigh: Gajardoni Challenge Jacket written review.

  • Sport Fencing Jackets:

    • For informal settings where you need an inexpensive jacket that still provides resistance to thrusts, a sport fencing jacket can work. In order to be effective, it must be layered with additional padding. At minimum, these additional layers should include a gorget, rigid chest protector, and forearm guards with integrated elbow protection. This type of jacket can be found used on eBay.

      Here are some reliable sources for new sport fencing jackets:

    • Gambesons

      • Traditionally, gambesons were used to protect from swords and cuts; gambesons can be used in HEMA today. However, the way the padding is constructed does not provide as much protection from blunt force trauma as a jacket would. Additionally, they are not optimized for HEMA use; they do not have integrated padding for high impact areas, loops to mount forearm or elbow protection, blade catchers in the collar, wicking lining, or an efficient overlapping front zip. They can be made to work, but the extra effort and cost usually end up costing as much as an AP light jacket would anyway.

Chest Protector

  • There is no reason not to wear a chest protector. Even in the most heavily padded HEMA jackets, the addition of rigid protection will help to disperse the impact of thrusts and can prevent bruises or broken ribs. In lighter jackets (e.g. the SPES officer jacket or sport fencing jackets), they are a necessity to prevent injuries. Chest protectors can also be worn when training without a jacket, but be aware that thrusts will tend to deflect off of the smooth surface, creating a risk that the blade could skip right up under the bib of the mask.

    • Men’s Chest Protector: Aside from men, many women prefer this chest protector since the women-specific chest protector is a one-sized fit all that does not, in fact, fit all.

    • Women’s Chest Protector: There is no universal chest protector that will fit every woman. The following sources are some options for chest defense that also include protection for the ribs and are suitable for HEMA. If at all possible, try them both at a local club and use the one that fits the best. Both of these options can be measured by bra size which helps to ensure a comfortable fit. Be aware that the shape of some women’s chest protectors may cause an increased risk of blows being deflected toward the sternum.

      • Econoguard Women’s Chest Protector:

        • If it fits and feels comfortable, this chest protector will offer excellent protection to the ribs and breasts. The plastic is thin enough to flex, and it fits easily under jackets.

      • Maxiguard:

        • The Maxiguard integrates a rigid plate into a sports bra, combining excellent protection with the functionality of a sports bra.

Arms

Elbow Protection

  • SPES Elbow Protector (used with a jacket):

    • This is one of the best elbow protectors available for HEMA. Few alternatives do everything an elbow protector needs to do at this low of a price. I highly recommend finding a way to tie these to your jacket to prevent them from slipping and sliding during a fight. Conveniently, they integrate really well with the SPES jacket.

  • Rollerblading/hockey/lacrosse elbow protection:

    • Some people prefer to repurpose previously used elbow protection from hockey, lacrosse, rollerblading, or other similar sports. Unlike the SPES elbow protectors that work best with a jacket, these alternatives can be used effectively either with or without a jacket and provide excellent protection to the elbow.

Forearm Protection

  • SPES Forearm Protectors with Integrated Elbows:

    • Because nearly all parries in dagger are made with the forearm, the ulna takes a lot of abuse if not appropriately protected. These forearm guards from SPES provide excellent protection at an affordable price. They cover all sides of the arm and include rigid elbows, offering good coverage even when training without a jacket.

  • Destroyer Modz Forearm Protectors (top recommendation):

    • These are designed to be put over a jacket and protect your arms with minimal bulk. They are less protective than the SPES guards, sacrificing protection for mobility; however, they are still excellent guards. They are also appropriate for use with weapons besides dagger. Again, I recommend you find a way to attach them to your jacket so they do not slip and slide.

Gloves

Gloves are not as much of a concern in dagger fighting as they are in other weapons because the hands are protected by the dagger itself and are rarely ever directly targeted. As such you can get away with lighter gloves or even no gloves at all depending on your sparring partner.

  • Light Gloves:

    • Lightly padded gloves are excellent for light drilling and solo practice. Depending on your training weapons and sparring partner, you might be able to safely spar with just these. Just be aware that the wrists and forearms are common targets, and the padding provided by these gloves might be insufficient.

  • Sparring Gloves (top five-fingered recommendation):

    • These are custom made and very lightweight. As such, they offer some of the best fit and mobility available among HEMA gloves; however, they sacrifice some protection for dexterity. They are one of the most customizable options available and are offered in a five-fingered, three-fingered hoof, or mitten style. Be aware that, as with any equipment, the resin will degrade over time and can potentially crack after years of use. Their United States distributor is HEMA Supplies.

  • Visby Gauntlets:

    • A relative newcomer to the HEMA market, these gloves provide protection via steel plates riveted into a leather glove. They are gaining a popular following and seem to be an excellent choice for durable five-fingered protection.

  • SPES Heavies:

    • The only reason to train dagger with SPES heavies is in case you use dagger with another weapon that requires that much protection: for example, drawing a dagger to use during a longsword grapple. Otherwise, there are very few situations in dagger sparring that would necessitate as much protection as the heavies provide, especially with offhanded or parrying daggers when the loss of dexterity could become a major hindrance.

  • Progauntlet:

    • These gloves can be pre-ordered (either through Proguntlet directly if you live in Europe or through Purpleheart if you live in the US). They have the potential to revolutionize the HEMA glove market, and I am very excited for them to come out. However, at the time of this writing, they are not available to the public. A glove will not do you any good until it is on your hand; for now, it may be best to stick to one of the above recommendations.

Legs

Pants

When training with daggers, pants and rigid knee protection are not as essential as they are with other weapons because the goal is generally to thrust, and any cuts to the legs don’t have the same force as a sword would. However, leg protection is still important to protect against bruises and incidental blows.

  • SPES Locust Pants (top recommendation):

    • I love these pants because the cut allows for good mobility and because the high hip padding provides nice protection if the jacket lifts up when the wearer assumes a high guard. The knees are padded, and anchor points are provided for the SPES knee guards. The women’s pants are cut specifically to accommodate wider hips.

      • Women’s Pants

      • Although they are more expensive, the SPES Hussar pants offer a higher newton rating and increased padding, while the Dragonfly model is an updated version of the Locust.

  • Leon Paul Titan Breeches:

    • These are one of the best alternatives to SPES pants, also boasting an 800N rating and featuring integrated high-density foam padding at key points.

  • SPES Skirt:

    • Despite the name, the skirt is co-ed and is not used strictly by female-identifying fencers. It is designed to provide additional protection to the upper thighs and hips. Because the skirt provides padding, it does not necessarily need to be paired with pants. If you do not want pants, it is a nice alternative to provide upper thigh padding and does not restrict mobility in the legs. Just be aware that the skirt closes in the back and therefore does not provide any padding to the tailbone. While the updated version is slightly more expensive then the original skirt, it features increased protection, a modular pad system, and quality buckles.

Groin Protection

  • Groin protection (search athletic cup):

    • This is mandatory for anyone with male genitalia and recommended for everyone else. You can find it in any major sports store or online. There are also specific models for anyone with female genitalia.

Knee Guards

  • SPES Knee Protector (top recommendation when paired with SPES pants):

    • These, like the elbow protectors, are one of the best knee guards because they do their job with the pants for a low cost. The pants have anchor points for the knees to ensure they do not go anywhere.

  • Knee Pro:

    • This is an unofficial standard of the community because it is cheap and it provides great protection. However, the buckles can fail or come undone during a fight. They are best used with the skirt or thin, non-SPES pants.

    • Sigmund Werndorf gives an excellent breakdown in this Measure and Weigh: Knee Pro Ultra written review.

  • Red Dragon Knee Guards:

    • The Red Dragon guards and others like them provide combined articulating knee protection and shin protection. Some people prefer the articulating knees and find the integrated shin guards convenient and protective.

  • Baseball knee/shin guards:

    • These combine knee and shin guards all in one and can be a great solution for leg protection. Buckles and straps on lesser guards can fail or come undone, but generally, the metal clips and rings on baseball guards are more durable than plastic. Look on eBay for cheaper alternatives to buying new.

Shin Guards

  • Harrow Probot Shin Guard (top recommendation):

    • These are designed to be worn under your socks and provide fantastic protection with no possibility of something flying off or moving during a fight. They are also high enough to integrate into your pants to prevent a gap between your knees and shin.

  • SPES Shin Guard:

    • These are simple but functional. The straps tend to wear down after a while, but they provide good protection for the price.

Socks

  • There is no real price difference between socks for fencing and compression socks. Just as long as they are knee-length and are snug without being constricting. They are designed to fit over shin guards or under shin protection to prevent chafing. Amazon can generally ship you something in a minimum of two days. Soccer or other sport socks also work just fine.

Shoes

  • Shoes are a personal choice based on your foot needs, traction preferences, and style. Personally, I have noticed that fencing shoes or tennis/court shoes tend to be thin enough that you can have good tactile feedback through your feet and grippy enough that you are not in danger of slipping. Some people find they prefer wrestling shoes or minimalist footwear. Always try to buy your shoes in person and test them at the store with footwork. Make sure if they rise up to support the ankle that you can still perform lunges and that the shoes do not limit your range of motion.

Kit Maintenance

Once you have bought all your kit, it is important to maintain it:

Notes About Kit

  • The most important thing is to make sure that you and your sparring partner are safe. HEMAA’s Safety Policy lays out what is required in your kit for each weapon in order to be safe and provides some starting definitions to help you navigate options as you become more familiar with this new world.

  • The order in which you buy pieces of kit is up to you. Generally, people buy a mask first (so they do not have to use other people’s sweaty masks), then gloves, a gorget, then finally a jacket. Mask, gloves, gorget, and groin protection should be the first things you buy. Do not forget groin protection.

  • If you are attending a club, make it a point to follow their gear guidelines and ask around for gear recommendations. If you see a weapon or a piece of kit that you are interested in, ask to try it out and get their feedback about the piece.

  • Before competing in any tournament, make sure your kit is compliant with their rules and safety guidelines. Be aware that some tournaments may have specific newton requirements for masks or other pieces of kit, so always read the rules before signing up.

  • A synthetic dagger is usually bought at or around the same time as a mask so that you can practice at home and do not have to keep chasing after training weapons during practice.

  • I personally like to have as much rigid protection integrated into jackets or pants as possible. Not only does this cut down on the time it takes to put it all on, but it also ensures everything stays in place during a fight. I have found that “free-floating” protection tends to be more trouble than it is worth. You do not want to have to fight your gear and your opponent at the same time.

  • There is such a thing as being overprotected. If you cannot feel hits, then you will not care about being hit. That will lead you to train recklessly and to form suicidal behaviors, which defeats the point of what we are trying to learn. Your kit should prevent you from getting hurt, but it should not take away from the experience of fearing getting hit. There is an important difference between the two.

  • This stuff is expensive, and it is okay if you cannot buy it all at once. It took me four years to build my full steel kit. Take your time and invest in quality, even if it is expensive, because it will serve you better in the long run. For a nice discount, try placing group orders with other members of your club.

  • Train in the full kit as much as possible; get used to it, and make it a second skin. Eventually, if you close your eyes, you should not be able to tell that you are wearing it because you are so used to the weight of it.

  • I have found that wearing a skin-tight base layer that is designed for cooling has made an incredible dent in the overheating problem. Available equipment has gotten better, and wicking jackets are a godsend, but you will still sweat a lot. Having wicking leggings, shirts, and headbands (depending on your preferences) helps to manage the sweat and accelerates the cooling process if you unzip your jacket between bouts. I have used rashguards in the past. For the best search results, use key phrases like “rashguard”, “cooling”, or “moisture wicking” for shirts, leggings, and headbands.

  • Once you are fully kitted up, there should be no skin showing. Not only does this protect your skin from abrasions either from the mat or rough weapon edges, but it also provides a wicking base layer to help manage heat and sweat.

  • For safety’s sake, it is generally a good idea to be wearing every part of the above list to spar with steel weapons; mask, gorget, groin protection, and gloves are the minimum possible gear for drilling with steel or sparring with synthetics. In general, no tournament will let you fight unless you have rigid joint and throat protection, forearm guards, gloves, some kind of jacket (preferably with a rigid chest protector), gorget, athletic cup, and a mask with a back of head protector.

Daggers

For a more in-depth discussion about synthetic vs. steel weapons visit this article. In general, synthetic daggers are used by beginners because they are less expensive and safer to train with than metal daggers. Metal daggers more accurately replicate real historical weapons, but they are also more expensive and require more protective equipment to train with safely. Rubber daggers are most commonly used for sparring and competition.

Synthetic

  • Cold Steel Roundel Dagger:

    • This is the community standard. It’s durable, affordable, accessible, and safe to use for sparring. The rondel is most popular for longsword fencing as a secondary weapon that can be drawn during a grapple. It’s also an excellent training tool to demonstrate universal dagger concepts.

  • Purpleheart Basic Daggers:

    • While most of these daggers have no flex and are unsuitable for full speed sparring, they are very affordable, durable, and often the only readily accessible training tools on the market for certain types of weapons. It would be difficult to find anywhere else that offers a European Bauernwehr, Persian Khanjar, Philipino Kris, and Chinese Deerhorn Knife all in one place. These daggers are fantastic for solo practice, drills, or teaching, and I cannot recommend them highly enough. There is no easier or more affordable way to enter HEMA than with a book, a friend, and a basic trainer or two.

  • Type III Pentti Long Dagger:

    • This dagger is excellent for techniques that require a crossguard and provides a wonderful complement to other Pentti weapons. It may also be used as a parrying dagger.

  • Black Fencer Light Dagger:

    • This dagger is an equivalent to Purpleheart’s Pentti dagger and is an excellent synthetic dagger for European fencers. The distributor of Black Fencer products in the United States is South Coast Swords.

  • Sail Dagger:

    • This is a fantastic parrying dagger designed specifically for use with a rapier or sidesword. The guard is designed to protect the hand, and the weapon is balanced to allow for dexterous, quick movements. The distributor of Blackfencer products in the United States is South Coast Swords.

Steel

Steel rondels are uncommon in HEMA, as they are hard to use safely since the very design of the rondel makes it stiff and inflexible. Steel parrying daggers used in rapier are much more common.

  • Regenyei Daggers

    • Rondel: One of the few steel rondels in HEMA. If you want a steel rondel, this is a good place to start.

    • Simple Parrying Dagger: This is a lighter, simplified parrying dagger designed for rapier fencing.

    • Sail Dagger: Designed to provide more protection for the hand, this dagger is an excellent choice for rapier fencing.

    • The distributor for Regenyei in the United States is HEMA Supplies.

  • Castille’s Build Your Own Dagger:

    • With a high degree of customization available, Castille offers everything from simple rondels to elegant and intricate parrying daggers. This is an excellent resource for fencers based in the United States.

Dagger Maintenance

Once you have purchased your expensive dagger, it’s important to take care of it.

  • Rust: Know Your Enemy: Sean Franklin discusses what rust is and how to prevent it from forming on your blades.

  • Training Sword Maintenance: A wonderful article published by HROARR that covers everything from rust to filing out nicks and dents, to storage and long term care.

Written by Nicholas Allen, founder and former head instructor of the VCU HEMA club.

Edited by Kiana Shurkin, xKDF

No Discussions Yet

Discuss Article