Kit

In general, a kit section is not very applicable to greatswords because they were not designed to fight other greatswords. Sparring with them is not only impractical but also carries potential dangers similar to those of sparring with polearms. However, controlled, mixed weapon sparring in which greatsword techniques are used against other weapons like spears or swords is much more common. Just be aware that hitting or thrusting full force with a greatsword will likely put someone in the hospital no matter what kit they are wearing.

Head

Fencing Mask

For an introduction to the differences between newton ratings for fencing masks, see this article by Keith Farrell about the difference between a “350N” fencing mask and a “1600N” fencing mask. Note that the minimum recommended newton rating for HEMA is 350.

  • AF Mask:

    • This mask offers great protection at an affordable cost and is the one of the best starting masks for beginners.

  • SPES Back of Head Protector:

    • Back of the head protection is required for steel fighting to protect the back of the head, neck, and upper spine from accidental blows. Overlays like the Unity and Trinity provide increased protection at increased cost, but they also tend to trap more heat inside the mask.

  • AF Deluxe HEMA Fencing Mask:

    • This version of the AF Fencing Mask has integrated back of head protection and padding on the sides and top of the mask. This makes it an excellent option for beginners who want extra protection. The main disadvantages are that the extra padding causes the mask to trap more heat and can impact mobility of the head. It also makes the mask more challenging to clean.

Gorgets

  • Destroyer Modz (top recommendation):

    • This is the unofficial default for the VCU HEMA club because it is small and tucks under the jacket nicely. It is affordable, accessible, low tech, and low hassle. This review written by Keith Farrell provides a more detailed critique.

  • PBT:

    • This has extra padding that can fit under the jacket for the collarbone, which is a nice feature, but depending on the jacket might not be necessary. This review by Keith Farrell offers a more detailed critique.

  • Red Dragon:

    • Easily accessible on Amazon, this is a simple and cheap option that does the job. The bib can also tuck under the lip of a chest protector when used without a jacket and can help prevent thrusts from deflecting off of the protector and sliding up under the mask.

  • Articulated Leon Paul Gorget:

    • This gorget is articulated and fully encloses the neck. It is arguably the most complete (and expensive) neck protection on the market.

Torso

Jacket

  • SPES AP Light (top recommendation):

    • This jacket is slightly more expensive than the base jacket. What makes it special is the extra integrated padding on the ribs, sternum, and shoulders, as well as its lighter weight and wicking lining. These features make it a worthwhile investment for those who desire greater protection and comfort than is offered by the base jacket. The women’s version is specifically cut to accommodate breasts. This jacket is multipurpose and can be used when training with most weapons.

      • There is a pro version that incorporates integrated rigid protection and is an excellent value.

  • Gajardoni Jacket:

    • This spectacular-looking jacket is made in Italy; it pioneered the internal foam plate concept that SPES has since integrated into their jackets. It includes hard shoulder and elbow plates and moves very well when properly fitted.

    • Jason Barrons gives his review in this Measure and Weigh: Gajardoni Challenge Jacket written review.

Chest Protector

  • There is no reason not to wear a chest protector. Even in the most heavily padded HEMA jackets, the addition of rigid protection will help to disperse the impact of thrusts and can prevent bruises or broken ribs. In lighter jackets (e.g. the SPES officer jacket or sport fencing jackets), they are a necessity to prevent injuries. Chest protectors can also be worn when training without a jacket, but be aware that thrusts will tend to deflect off of the smooth surface, creating a risk that the blade could skip right up under the bib of the mask.

    • Men’s Chest Protector: Aside from men, many women prefer this chest protector since the women-specific chest protector is a one-sized fit all that does not, in fact, fit all.

    • Women’s Chest Protector: There is no universal chest protector that will fit every woman. The following sources are some options for chest defense that also include protection for the ribs and are suitable for HEMA. If at all possible, try them both at a local club and use the one that fits the best. Both of these options can be measured by bra size which helps to ensure a comfortable fit. Be aware that the shape of some women’s chest protectors may cause an increased risk of blows being deflected toward the sternum.

      • Econoguard Women’s Chest Protector:

        • If it fits and feels comfortable, this chest protector will offer excellent protection to the ribs and breasts. The plastic is thin enough to flex, and it fits easily under jackets.

      • Maxiguard:

        • The Maxiguard integrates a rigid plate into a sports bra, combining excellent protection with the functionality of a sports bra.

Arms

Elbow Protection

  • SPES Elbow Protector (used with a jacket):

    • This is one of the best elbow protectors available for HEMA. Few alternatives do everything an elbow protector needs to do at this low of a price. I highly recommend finding a way to tie these to your jacket to prevent them from slipping and sliding during a fight. Conveniently, they integrate really well with the SPES jacket.

  • Rollerblading/hockey/lacrosse elbow protection:

    • Some people prefer to repurpose previously used elbow protection from hockey, lacrosse, rollerblading, or other similar sports. Unlike the SPES elbow protectors that work best with a jacket, these alternatives can be used effectively either with or without a jacket and provide excellent protection to the elbow.

Forearm Protection

  • Destroyer Modz Forearm Protectors (top recommendation):

    • These are designed to be put over a jacket and protect your arms with minimal bulk. This helps to prevent them from interfering with high guards. Again, I recommend you find a way to attach them to your jacket so they do not slip and slide.

    SPES Forearm Protectors with Integrated Elbows:

    • These offer great protection and are reasonably priced. Unlike many other forearm guards, they cover all sides of the arm and include elbow protection.

Gloves

  • SPES Heavies: (top beginner recommendation):

    • There is no perfect HEMA glove, but these will give you a good chance of going home with all ten fingers intact. They sacrifice mobility and dexterity for protection. The flared cuffs work really well with the SPES jacket. Consider adding blast caps to the thumb.

  • Sparring Gloves (top five-fingered recommendation):

    • These are custom made and very lightweight. As such, they offer some of the best fit and mobility available among HEMA gloves; however, they sacrifice some protection for dexterity. They are one of the most customizable options available and are offered in a five-fingered, three-fingered hoof, or mitten style. The mitten style is a popular choice among competitors in European tournaments. The five-fingered style is among the best options for those seeking additional dexterity, provided you are willing to pay a little extra and wait a little longer for your gloves. Be aware that, as with any equipment, the resin will degrade over time and can potentially crack after years of use. Their United States distributor is HEMA Supplies.

  • Visby Gauntlets:

    • A relative newcomer to the HEMA market, these gloves provide protection via steel plates riveted into a leather glove. They are gaining a popular following and seem to be an excellent choice for durable five-fingered protection.

  • Light Gloves:

    • Lightly padded gloves such as these are excellent for light drilling and solo practice. However, they should not be used in partner drills unless both practitioners are experienced, and they should never be used when sparring with a greatsword.

  • Progauntlet:

    • These gloves can be pre-ordered (either through Proguntlet directly if you live in Europe or through Purpleheart if you live in the US). They have the potential to revolutionize the HEMA glove market, and I am very excited for them to come out. However, at the time of this writing, they are not available to the public. A glove will not do you any good until it is on your hand; for now, it may be best to stick to one of the above recommendations.

Legs

Pants

  • SPES Locust Pants (top recommendation):

    • I love these pants because the cut allows for good mobility and because the high hip padding provides nice protection if the jacket lifts up when the wearer assumes a high guard. The knees are padded, and anchor points are provided for the SPES knee guards. The women’s pants are cut specifically to accommodate wider hips.

      • Women’s Pants

      • Although they are more expensive, the SPES Hussar pants offer a higher newton rating and increased padding, while the Dragonfly model is an updated version of the Locust.

  • Leon Paul Titan Breeches:

    • These are one of the best alternatives to SPES pants, also boasting an 800N rating and featuring integrated high-density foam padding at key points.

  • SPES Skirt:

    • Despite the name, the skirt is co-ed and is not used strictly by female-identifying fencers. It is designed to provide additional protection to the upper thighs and hips. Because the skirt provides padding, it does not necessarily need to be paired with pants. If you do not want pants, it is a nice alternative to provide upper thigh padding and does not restrict mobility in the legs. Just be aware that the skirt closes in the back and therefore does not provide any padding to the tailbone. While the updated version is slightly more expensive then the original skirt, it features increased protection, a modular pad system, and quality buckles.

Groin Protection

  • Groin protection in general (search athletic cup):

    • This is mandatory for anyone with male genitalia and recommended for everyone else. You can find it in any major sports store or online. There are also specific models for anyone with female genitalia.

Knee Guards

  • SPES Knee Protector (top recommendation when paired with SPES pants):

    • These, like the elbow protectors, are one of the best knee guards because they do their job with the pants for a low cost. The pants have anchor points for the knees to ensure they do not go anywhere.

  • Knee Pro:

    • This is an unofficial standard of the community because it is cheap and it provides great protection. However, the buckles can fail or come undone during a fight. They are best used with the skirt or thin, non-SPES pants.

    • Sigmund Werndorf gives an excellent breakdown in this Measure and Weigh: Knee Pro Ultra written review.

  • Red Dragon Knee Guards/Motocross Guards:

    • The Red Dragon guards and others like them provide combined articulating knee protection and shin protection. Some people prefer the articulating knees and find the integrated shin guards convenient and protective.

      • A quality source for good motocross gear is Broomball.

  • Baseball knee/shin guards:

    • These combine knee and shin guards all in one and can be a great solution for leg protection. Buckles and straps on lesser guards can fail or come undone, but generally, the metal clips and rings on baseball guards are more durable than plastic. Look on eBay for cheaper alternatives to buying new.

Shin Guards

  • Harrow Probot Shin Guard (top recommendation):

    • These are designed to be worn under your socks and provide fantastic protection with no possibility of something flying off or moving during a fight. They are also high enough to integrate into your pants to prevent a gap between your knees and shin.

  • SPES Shin Guard:

    • These are simple but functional. The straps tend to wear down after a while, but they provide good protection for the price.

Socks

  • There is no real price difference between socks for fencing and compression socks. Just as long as they are knee-length and are snug without being constricting. They are designed to fit over shin guards or under shin protection to prevent chafing. Amazon can generally ship you something in a minimum of two days. Soccer or other sport socks also work just fine.

Shoes

  • Shoes are a personal choice based on your foot needs, traction preferences, and style. Personally, I have noticed that fencing shoes or tennis/court shoes tend to be thin enough that you can have good tactile feedback through your feet and grippy enough that you are not in danger of slipping. Some people find they prefer wrestling shoes or minimalist footwear. Always try to buy your shoes in person and test them at the store with footwork. Make sure if they rise up to support the ankle that you can still perform lunges and that the shoes do not limit your range of motion.

Kit Maintenance

Once you have bought all your kit, it is important to maintain it:

Notes About Kit

  • The most important thing is to make sure that you and your sparring partner are safe. HEMAA’s Safety Policy lays out what is required in your kit for each weapon in order to be safe and provides some starting definitions to help you navigate options as you become more familiar with this new world.

  • The order in which you buy pieces of kit is up to you. Generally, people buy a mask first (so they do not have to use other people’s sweaty masks), then gloves, a gorget, then finally a jacket. Mask, gloves, gorget, and groin protection should be the first things you buy. Do not forget groin protection.

  • If you are attending a club, make it a point to follow their gear guidelines and ask around for gear recommendations. If you see a sword or a piece of kit that you are interested in, ask to try it out and get their feedback about the piece.

  • Before competing in any tournament, make sure your kit is compliant with their rules and safety guidelines. Be aware that some tournaments may have specific newton requirements for masks or other pieces of kit, so always read the rules before signing up.

  • A synthetic sword is usually bought at or around the same time as a mask so you can practice at home and do not have to keep chasing down swords during practice.

  • I personally like to have as much rigid protection integrated into jackets or pants as possible. Not only does this cut down on the time it takes to put it all on, but it also ensures everything stays in place during a fight. I have found that “free-floating” protection tends to be more trouble than it is worth. You do not want to have to fight your gear and your opponent at the same time.

  • There is such a thing as being overprotected. If you cannot feel hits, then you will not care about being hit. That will lead you to train recklessly and to form suicidal behaviors, which defeats the point of what we are trying to learn. Your kit should prevent you from getting hurt, but it should not take away from the experience of fearing getting hit. There is an important difference between the two.

  • This stuff is expensive, and it is okay if you cannot buy it all at once. It took me four years to build my full steel kit. Take your time and invest in quality, even if it is expensive, because it will serve you better in the long run. For a nice discount, try placing group orders with other members of your club.

  • Train in the full kit as much as possible; get used to it, and make it a second skin. Eventually, if you close your eyes, you should not be able to tell that you are wearing it because you are so used to the weight of it.

  • I have found that wearing a skin-tight base layer that is designed for cooling has made an incredible dent in the overheating problem. Available equipment has gotten better, and wicking jackets are a godsend, but you will still sweat a lot. Having wicking leggings, shirts, and headbands (depending on your preferences) helps to manage the sweat and accelerates the cooling process if you unzip your jacket between bouts. I have used rashguards in the past. For the best search results, use key phrases like “rashguard”, “cooling”, or “moisture wicking” for shirts, leggings, and headbands.

  • Once you are fully kitted up, there should be no skin showing. Not only does this protect your skin from abrasions either from the mat or rough weapon edges, but it also provides a wicking base layer to help manage heat and sweat.

  • For safety’s sake, it is generally a good idea to be wearing every part of the above list to spar with steel swords; mask, gorget, groin protection, and gloves are the minimum possible gear for drilling in steel or sparring with synthetics. In general, no tournament will let you fight unless you have rigid joint and throat protection, forearm guards, gloves, some kind of jacket (preferably with a rigid chest protector), gorget, athletic cup, and a mask with a back of head protector.

Swords

For a more in-depth discussion about nylon swords vs. steel swords, visit this article. In general, nylon swords are used by beginners because they are less expensive and safer to train with than steel swords. Steel swords accurately replicate real historical weapons and are the preferred tool for training and competition; however, they are more expensive and require more protective equipment to safely spar with.

Synthetic

  • Black Fencer Greatsword:

    • Currently the only source of synthetics of this type, Black Fencer offers everything from a simple two-handed sword all the way up to a flamberge montante. All of their synthetic greatswords are fantastic training tools of very high quality. The distributor for Black Fencer in the United States is South Coast Swords, although currently, they only offer the Marozzo Two-Handed Sword and the Danish Two-Handed Sword.

Steel

  • Purpleheart VB Marozzo Style Two-handed Sword Feder:

    • This is one of the most affordable greatswords on the market. While slightly smaller than some historical examples, it is an excellent way to get into training Marozzo’s two-handed sword.

  • Regenyei Two-Handed Trainer:

    • Light and nimble, this sword is an excellent training tool for two-handed swords. Regenyei has a wide selection of greatswords from simple two-handed swords to flamberge montantes. The distributor for Regenyei swords in the United States is HEMA Supplies.

  • Blackhorse Greatsword:

    • These greatswords are extremely durable training tools. Be advised that they are very stiff in the thrust. Currently, Blackhorse is set up for American shipping only. International customers will have to arrange custom shipping.

Written by Nicholas Allen, founder and former head instructor of the VCU HEMA club.

Edited by Kiana Shurkin, xKDF

No Discussions Yet

Discuss Article